ALPHA MOTO

Motorcycle Fork Seal Driver 

Essential tool for your regular motorcycle maintenance!

  • Made in Taiwan with superior quality! 

  • Comes with two ranges: 33mm-45mm, 48mm-54mm 

  • Adjustable driver size works on a variety of the motorcycles! 

Fast shipping

Same day shipping, order placed by 11am PST will be shipped same day, then expect to receive your order within 2-3 days!

Huge savings

No sales tax for residence outside Nevada! 8%-9% savings

30 days money back guarantee

If you are not completely satisfied with your order, just send it back within 30 days!

motorcycle fork seal driver
Motorcycle Adjustable Fork Seal Driver Tool 33mm-45mm and 48mm-54mmMotorcycle Adjustable Fork Seal Driver Tool 33mm-45mm and 48mm-54mm

Motorcycle Fork Seal Driver

  • Replacing fork seals is an essential process to maintain your bike, and here is THE tool you need to get the job done!
  • When you first notice the sign of oil on the stanchion tube's legs when the forks travel, it is time to change your fork seal.
  • If the leak is allowed, the oil will continue to run down the back of the fork leg, onto the brake calipers.
  • Eventually the fork will run out of oil, seizing the bushing surfaces which allow the fork halves to slide, eventually lock up the front end.
  • This fork seal driver set, includes two fork seal drivers.Will work for size range: 33mm-45mm and 48mm-54mm. Each fork seal drivers has a carbon steel with a split design.
  • Designed for easy installation of most fork seals. Manufactured from carbon steel, split design with weighted body. Works on most conventional or inverted forks.
  • Three jaw chuck may create pressure points.





STOCK IS LIMITED, BUY IT NOW BEFORE IT IS GONE

20

  • Essential tool for regular motorcycle maintenance !

  • Every DIY motorcyclist should have one in their garages!

  • Protect your new seal during installation!

$0.00$62.50

five-star reviews

Essential Tool for Replacing Fork Seal:

Instructions:

1. Take apart the fork ...

2. Slide the old seal off

3. Inspect the stanchion for blemishes

4. Oil the inner surface of the new seal with fresh fork oil

5. Slip the seal over the top of the stanchion and slide it down to the slider.

6. Adjust the tool’s plastic fitting to match the size of the seal by loosening the three cross head screws and decreasing or increasing the diameter.

7.Press the adapters against the seal, slide the driver tool up and down several times until seal is pushed into the slider

HOW IT WORKS

Please refer to above video for Demo (You will get the full kit)!

Designed for easy Fork Seal installation

This fork seal driver tool has a two-piece design. 


The bottom plastic piece directly contacts the seal, it is shaped in a way that press the seal into the recess of the fork tube. 


The Top metal piece, is made of heavy metal, it acts like a slide hammer to smack the seal into position.


With a few up and downs motion, the seal will be properly seated in the fork tube.

Two piece design, with weighted steel body

Won't damage your new fork seals during installations.


The weight of the tool presses the seal evenly into the fork tube.


Adjustable size, no need to buy specific size for each individual bike


The tool is designed to install OEM lip style seals.

QUESTIONS? LOOK HERE!

Can't find question? call or Text us +702-3362588 or email us alphamotoparts@gmail.com

Will this fork seal driver kit work for my motorcycle?

Please go to https://www.motorcycle.com/specs/  and put your bike model and year in "Motorcycle Finder",  look for "front suspension size" under "Suspension" section. 

What material it is made of?

The chrome weight is made of steel, the fitting is made of high quality plastic. 

How to adjust the size?

The three plastic fittings are connected via a strip of metal, there are screws on the both end of the fittings allow for adjustments.

Can I use a PVC pipe as a seal driver ?

It will probably costs you around $200 up to have the seal replaced by a shop, when it comes to saving, a lot ppl might be inclined to the idea of cheap PVC pipe, the reality is it takes a lot more effort to find the right size one and set it up, and the PVC pipe will not stay in place, you will still need to use a hammer, it is just not worth the hassle.

This kit includes two drivers, can I just get one ?

Yes, we offer the individual one separately, see below.

YOU MIGHT ALSO INTERESTED IN!

Checkout below similar products

universal fork seal driver
$0.00$68.50

Now Only

$68.50

100% No-Risk Money Back Guarantee

Fork Seal Driver

BEST DEAL

$0.00$38.50

Now Only

$38.50

100% No-Risk Money Back Guarantee

Fork Seal Driver

BEST DEAL

$0.00$32.50

Now Only

$32.50

100% No-Risk Money Back Guarantee

Your 100% satisfaction is our goal!

No matter if you are a professional mechanic or amateur - ALPHA MOTO is your reliable partner when it comes to motorcycle tools and parts.